- 33 -
■12-3：Attaching Glass Fiber Pole to AEU
Inserting glass fiber pole into supporting rubber.
Please make sure that the element tip is inside the element guide when you insert
glass fiber pole.
If the element tip is pushed by the glass fiber pole, element would be bent and got
crooked.
See［Figure33］
After confirming the position of element
tip, insert the glass fiber pole to the end
until it hit the element guide.
It may be a little hard to insert
because of friction.
You can apply a bit of silicon grease
to the surface of glass fiber pole.
You can turn the glass fiber
pole Back and forth, which
may help to Insert fully to the
end.
See［Figure33、Figure34］
＊NOTE
・When you insert the
glass fiber pole, you need to insert
until hitting the element guide.
However, you may break the guide
If you push the pole too much.
The broken element guide may
cause the trouble.
・If the bolts( M8×110) are tightened
you should not to be able to
insert the glass fiber pole.
These hexagon head bolts
should be tightened after
poles are fully inserted.
