- 24 -
■11-2：Attaching Pole Support(bottom) to plate
First you need to attach pole support(C,D) to the plate that you assembled as shown
「Figure11-1」. Then you put AEU that you reassembled rubber tubes on the plate
with pole supports. See 「Figure 24」.
There are four different sizes of pole supports. 「38H/L」are for 5m element , and
「45H/L」are for 7m element. Ls are placed at inner positions. Hs are at outer
positions.
See 「Diagram12、Figure24」very carefully in order to use the right part for the right
place.
