- 16 -
9.
How to Check AEU Working Properly
■Please operate AEU using a controller
AFTER the connection is done, connect AC Adaptor with controller.
＊Please follow the procedure#1 to #4 described here to check AEU.
See［Figure12］
#1
Make all the connection like AC adaptor with outlet and KA1 controller.
You will see controller POWER ON, and then [Model Number, Software Ver.,
ROM Ver. And available frequency range] in the LCD screen. And then HOME
screen will be shown.
See［Figure13、Figure14］
Press and hold ①POWER button to turn OFF power.
→Go to #2
＊
NOTE If you see a different indication in the LCD screen (for example:
numbers like 12 456, without 3), an element that isn
’
t shown ( in this
case: element 3) may not be retracted properly at HOME position.
If you experience above, you need to extend elements once.
②Press 50M button to extend elements
Extending movement stops at about 1.5m (5feet) long on each side.
（Please watch elements carefully in order for them not to get damages
or dirty）
After above operation press and hold ⑤AUTO/HOME button to make
“
Push
SET
”
blink, and then press ④SET button. You will see Figure14.
Next step : Press①POWER to power off
→Go to procedure #2
