q
Optimum sensor for electrostatic monitoring
on production line arrives!
Offers electrostatic measurement and constant monitoring on production line
difficult to handle with handy-type measuring instruments.
All-in-one configuration achieves lower costs and total space reduction.
Optimum sensor for electrostatic monitoring
on production line arrives!
EP Sensor
Enables electrostatic control on production line
Constant monitoring of invisible static electricity can be performed
without expending manhours on electrostatic measurement or controls.
Electrostatic controls through constant monitoring can be performed in
measurement locations difficult to reach with handy-type measuring
instruments.
Three operation mode patterns are available
Selectable from the averaged data output mode, actual measured data
output mode, and ion balance monitor mode.
●
Averaged data output mode
Averages the measured data and outputs it externally.
For the data output cycle, select from 100ms, 200ms, 500ms, and 1s.
●
Actual measured data output mode
Outputs the actual measured data externally.
For the data output cycle, select from 100ms, 200ms, 500ms, and 1s.
●
Ion balance monitor mode
Measures the ion balance of the ionizer.
Simple function and simple design
All-in-one design gives functions of judgment output and abnormality
output to the EP Sensor unit. Moreover, since it can be connected
directly to an external controller unit without passing through an
amplifier etc., the unit achieves a total space reduction.
Enables confirmation of ionizer performance
with ion balance measurement function
Easy checking of simple ion balance by mounting
a monitor plate
note
.
Note: Monitor plate is optional.
Component bracket available
With a separately sold component bracket, various mounting directions
become possible.
Voltage data includes both digital and
analog output, and connection method to
control devices can also be selected
Storing history, etc., on a PC can be performed as judgment output
externally.
Selectable from either EP Monitor or PC
software for EP Sensor setting method
EP Sensor settings can be performed either through the EP Monitor or
the PC software. Settings use RS232C communication.
With zero calibration function switch
The zero calibration function can be used to adjust the current
measured value to 0V.
ON
OFF
V
oltage
MAX
(Threshold)
MIN
(Threshold)
Judgment output
A. S. OUT
SW.OUT
ch
1
2
3
4
DTY-EPU
Judgment output function
If the voltage setting (threshold) is exceeded, notification is made by a
sensor LED and voltage comparison output (judgment output).
Monitor plate
Ionizer
Monitor plate
※
For the distance between the
ionizer and monitor plate, see
the recommended minimum
position distances set by each
ionizer manufacturer.
Environmentally friendly
RoHS
compliant product!
Summary of Contents for DTY-EPS Series
Page 14: ... 3 MEMO ...