Koganei DTRY-ELB01 Manual Download Page 4

Page: 4 / 20

■

Compact body unit allows installation

in confined spaces such as inside application
equipment.

●

Placing the Ionizer close to a product rapidly

removes the static electricity with pinpoint accuracy.
The closest minimum distance to a targeted charging
object is 10mm.

■

Due to good ion balance, the removal of static

electricity is always possible.

●

15 V range at 100 mm distance.

■

Compact but superb removing static electricity

performance.

●

Decay time from 1000V to 100V at 100mm distance

is within 3 seconds.

■

You are not required to supply air to the Fan

type Ionizer therefore reducing running costs.

■

Alarm output in case abnormality occurs in the Ionizer.

●

Enables prevention of manufacturing defective

products caused by a faulty Ionizer.

■

Alarm output when a blower fan stops.

●

An alarm is produced within a second when an ion

blower fan stops.

■

Possible to connect in series.

●

By using the DC power output from the Ionizer, it is

possible to connect up number of units in series.

Note: In the case of series connection, the error

signal on each Ionizer is not available.

Fan type

Wide-flow fan type

■

You can make pinpoint static electricity removal

for distant work pieces.

●

A sirocco fan generating a large volume of air is

used, making it possible to achieve high-speed
pinpoint static electricity removal for distant work
pieces without using compressed air.

■

Using a flow rate adjusting plate, you can

easily obtain the required flow rate.

●

By using the provided flow rate adjusting plate, you

can adjust your required airflow rate easily.

■

Compact space saving design.

●

The palm-size compact design offers you a space-

saving ionizer, allowing you a wider choice of
installation positions.

■

Using the optional bracket, you can install the

ionizer flexibly.

●

By using the optional bracket, you can easily make

angle adjustments and installation adjustment in vertical
direction of the main unit of the ionizer. (

DTRY-ELQ01

)

■

Using the flow direction adjusting plate at the fan

outlet, you can make fine adjustment of the
direction of the airflow.

●

By using the flow direction adjusting plate at the fan

outlet, you can make fine adjustments of the horizontal
direction airflow.

Turbo-flow fan type

Application examples

●

Static electricity removal

for circuit boards etc..

You can make static electricity removal for
relatively wide objects.

●

Static electricity removal

for packaging films etc.

You can remove the static electricity generated
when the film leaves the film roller.

●

Static electricity removal

for plastic container and parts etc.

You can make static electricity removal from relatively
far locations.

Flow rate adjusting plate

Flow direction-adjusting
bracket (option)

■

Most suitable for static electricity removal for

wide and large work pieces.

●

The ionizer uses a cross flow fan, allowing you to make

high-speed static electricity removal for wide circuit
boards, liquid crystal works, packaging films etc.

■

Using the optional flow direction-adjusting bracket,

you can make fine adjustment of the ion flow.

●

Installing the optional flow direction-adjusting bracket,

you can adjust the vertical direction (upward and
downward directions) of the flow up to 15˚.

■

Depending on the size of the work piece, you

can choose between two types of ionizers.

●

Two types of ionizers are available. One is fitted with

a 100mm wide flow outlet and the other comes with
a 200mm wide flow outlet, enabling you to select the
appropriate one according to the size of the work
concerned.

■

Thin space-saving design.

●

Unlike conventional ionizers, this ionizer is thin,

allowing you a wider choice of installation positions.
Use of the bracket provided allows you to mount the
ionizer with the main unit’s upper surface as its
mounting surface.

■

The airflow rate selector switch enables to

adjust the flow rate.

●

By using the flow rate selector switch on the front of

the main unit, you can adjust the airflow rate
according to the work concerned.

■

The airflow rate selector switch and the

abnormal condition LED indicator are placed on
the flow outlet side, giving you excellent
performance and visual confirmation.