9
TIP
Check back to step 1 to ensure you’ve selected the
correct dot position for your door configuration.
b.
Adjust the dot direction on the square steel sleeve with reference to
the sticker on the rubber mat:
• Left-hand door configurations: set the dot left or right
• Right-hand door configurations: set the dot at the top or bottom
c.
Insert the suitable square steel into the lock body.
d.
Pass the connection line through the door hole.
e.
Align the square steel with the square steel hole of the front panel
and fix the front panel on the door, then press the other end of the
square steel.
Summary of Contents for SmarterHome KASHFNGDLKA
Page 18: ...18 NOTES ...
Page 19: ...19 ...
