TIRE SIZE
CIRC
TIRE SIZE
Perimeter
700c x 38mm
2170
26” x 2.125”
2133
700c x 35mm
2205
26” x 2.0”
2114
700c x 28mm
2149
26” x 1.9”
2089
700c x 23mm
2133
26” x 1.75”
2035
700c x 20mm
2114
26” x 1.6”
2051
650c x 20mm
1945
26” x 1.5”
2026
29” x 2.25”
2390
26” x 1.0”
1973
29” x 2.0”
2336
24” x 1.75”
1907
28” x 1.75”
2268
20” x 2.0”
1550
28” x 1.5”
2224
20” x 1.5”
1500
27” x 11/4”
2199
20” x 1.25”
1465
27” x 11/8”
2174
18” x 1.5”
1350
26” x 2.3”
2135
16” x 1.75”
1230
26” x 2.25”
2115
16” x 1.35”
1160
Selecting KPH or MPH
Press right key to choose KM /hr or Mile/hr mode.
Press the left key to enter into the Maintain Reminder mode.
Maintain Reminder Functions
Press right key to choose KM/hr or Mile/hr mode. Press the left key to enter into
the Maintain Reminder mode. The default value is: 200(KM/M). Press the right
key to select between 200, 400, 600, 800(KM/M). When the numerical value
reaches to the setting value, the spanner sign will be flashing. Press the right key
for 3 seconds to cancel it.
Setting The Clock
In Clock mode, press the “Left key” for 3 seconds to enter the 12/24hr time
settings. Press the left key to alternate between 12/24hr time, press the right key
to confirm a selection. When the hour value begins to flash, press the left key to
change it, then press the right key to confirm your selection. Press the right key
to enter into the Odometer mode.
Setting the ODO (odometer)
The ODO ranges from 0~99999 (KM/M). It will be automatically cleared when
the value overruns the maximum number. Whilst in the ODO mode, press the
left key for 3 seconds to enter the settings. The default number will be 0000.0.
Press the right key to change the number, then press left button to confirm the
selection. Press the right key to enter into the DST mode.
Trip Distance (DST)
This mode focuses upon recording the distance of a single trip (TM). Distance
records range from 0.001~9999 (KM/Hr). Records will be automatically cleared
when the value overruns the maximum number. Whilst in DST mode, press the
left key for 3 seconds – the DST value will be altered to read ‘0’, as well as the
value of MXS, AVS, TM. Press the right key to enter into (MXS) mode.
2
