20
By using cleaning solution:
1.
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water
tank.
2.
Secure and position the unit to ensure steam released is aimed away from the floor
or surrounding objects and surfaces. Plug the unit in, turn the unit ON by pressing
the steam switch (O/I) and allow the unit to produce steam until the vinegar/water
solution is used up.
3.
Repeat the above procedures as many times as necessary until a normal steam flow
rate is achieved.
4.
Fill the water tank with fresh water and rinse out.
5.
Fill the water tank with fresh water, attach to the unit and release the steam
through the system until the water tank is empty.
Do not leave the steam cleaner unattended during the lime scale removal process
and/or while in use.
Perform a test cleaning on a suitable isolated area after each lime scale removal process to
ensure that there is no debris in the system.
Cleaning blocked steamer accessories:
Due to the high mineral content of water in some areas, you may notice less steam coming
out from the hand-held steamer accessories. This may be caused by calcium build-up
inside the tip of the nozzle.
How to clean calcium build-up:
It is recommended to use a spray lubricant. Spray a small burst or two of the lubricant
inside the tip of the jet nozzle. After spraying lubricant inside the component, fill the
steamer with water according to the directions and run a continuous jet of steam through
the affected accessory for several minutes to remove the deposit. Once the steam pathway
is clean, aim the steamer at a neutral surface or a cleaning cloth to make sure no debris is
emitted.
It is recommended to perform this procedure in a protected and well-ventilated area.
Microfiber cloth care:
•
Machine washable at 60°C (140°F).
•
Do not bleach.
•
Do not use fabric softener.
Summary of Contents for KASWPSTM11A
Page 4: ...4 Overview ...
