19
Cleaning & Care
Be sure that both switches are in off position and the unit is disconnected from the
power outlet when performing cleaning.
Drain the remaining water in the tank and clean the tank after every use. Please use
detergent to clean the accessories (jet nozzle and round brush) when they are dirty, then
wash with clean water and air dry.
To empty the dust bin, pull the dust bin from the side of head. Empty into a trash can. The
dust bin may be warm to touch.
You should wash the 2-piece dust-blocking cover on the rectangle head after a period of
time in use.
How to decalcify the water tank interior:
To clean calcium deposits that build up inside the water tank, add one or two tablespoons
of white vinegar to a full water tank, close the water tank cap and shake the contents. DO
NOT TURN THE STEAMER ON.
Let the unit sit for a few hours. Then, empty the water tank and refill with clean water and
empty until it rinses clear.
DO NOT IMMERSE THE STEAM CLEANER IN WATER.
Cleaning procedure to remove lime scale
If your steam mop sweeper begins to produce steam more slowly than usual or stops
producing steam you may need to remove lime scale. Lime scale can develop over time on
the metal parts and greatly affect mop performance. It is necessary to remove lime scale
on a regular basis every 25-50 times you use a full tank of water or at least once a month,
especially in areas with hard water. The frequency of lime scale removal depends upon the
hardness of your tap water and how often you use the steam cleaner.
The steam mop sweeper uses tap water. However, in areas with hard water, distilled
water should be used for better performance.
To remove lime scale from the steam mop sweeper, please follow these procedures:
By using scraper:
Make sure that the steam mop sweeper is disconnected from the power supply before
maintenance.
Use the cleaning pin to remove scale deposits from the small hole of the steam outlet in
the main body, as illustrated below. By swirling and pushing the pin up and down you will
clean the steam outlet. Always ensure that all scale debris have been removed from the
steam outlet before reassembling. Continue swirl cleaning until no further debris is evident.
Summary of Contents for KASWPSTM11A
Page 4: ...4 Overview ...
