Kogan KASTTVPB55A, User Manual

Page: 6 / 16

Step 2:
Attaching the stand
Place the stand (A) and joint cover (I) into position on the cross-beam, securing it with x4
washers (Q) and M6x50mm screws (N). Use the Allen key (S) to tighten.
Warning:
To adjust the height, pull
the safety spring lock outwards (1)
while pulling the column upward
(2) at the same time. Always
ensure the spring lock aligns with
the keyhole, otherwise a sudden
drop may occur resulting in injury
or property damage.
Note: The MAX line found on the
column indicate the highest
position. Never go beyond the
MAX line marking.