Cleaning the Dust Cup
1. Remove the dust cup from
the body.
2. Press the dust cup bottom
release button, then the
dust will fall out
automatically. (as shown in
Fig A)
3. If you find the plastic filter
system is too dirty, please
press the dust cup cover
(for the air exhaust) release
button, remove the filter
assembly cup (as shown in
Fig B) and you can then
clean them with a soft
brush or clean them with
water. They should then be
dried thoroughly before
use again.
Fig A
Fig B
Changing or Cleaning Sponge and HV Cotton Filter
1. Remove the dust cup from the body.
2. Rotate the dust cup cover anticlockwise
from “close” to “open”, then remove the
dust cup cover. Lift the HV cotton filter
out (as shown in Fig A).
3. Pull the knob of the filter frame up, then
pull out the sponge filter and the HV
cotton filter from the case box. Clean
the sponge and HV cotton filter with a
soft brush, or rinse it in lukewarm water
(as shown in Fig B), then allow it to dry
thoroughly before use. All filters are
washable. (it is recommended that you
clean the filters when you find that the
suction is becoming weak).
4. Ensure that you place the filters back
into position BEFORE using the vacuum
again. Using the unit without the filters
in position can damage the vacuum.
Fig A
Fig B
7
