Assembly
Install the main brush
If you want to use the brush, it can
be easily installed as shown to the
right.
Installing connection joint
Insert the 2-in-1 crevice/brush tool
into the connecting joint. It will not
click into place. Then insert the
connecting joint into the main
body, and it WILL click into place.
To disassemble the 2-in-1
crevice/brush tool from the pole,
pull the 2-in-1 tool straight out
from the connecting joint. Press
the red pole attachment release
button, then remove the
connecting joint.
Installing Extended Aluminium
Tube
The aluminium tube can be used to
extend the reach of the vacuum so
it can be used as a vertical vacuum
cleaner.
Once installed, the main brush can
then be connected to the end of
the tube to clean floors/carpets.
The multi-crevice nozzle can also
be attached for cleaning ceilings,
curtains and other difficult to clean
surfaces.
Removing/Installing Dust Cap
a) Remove dust cap from the
body: Push the release button
for the dust cup, then remove
the dust cup from the body.
b) Install dust cap on body: first
make the underside of the dust
cup to connect with the body.
(Please pay attention to the
fitting position and direction),
then push the dust cup to close
with the body. The dust cup
will be locked once you hear
the clicking noise.
Fig A
Fig B
4
