IMPORTANT:
Before first use, ensure the heater has sat upright for 15–30 minutes to allow
the oil inside to settle. Doing so will ensure normal operation.
Placement
Ensure there is at least a 30cm clearance of the heater from any objects or walls.
Powering on
1.
Fully uncoil the power cord from the storage ring.
2.
Plug the power cord into a power socket and turn on the socket. The heater will turn
on and the power indicator will illuminate.
Thermostat
Turn the thermostat between the MIN and MAX markers to adjust the temperature of heat
being emitted by the heater.
The closer it is turned towards the MAX marker, the hotter the temperature. If the room
becomes too hot, turn the thermostat towards the MIN marker. The heater will then
automatically enter a cycle of turning on/off to regulate the temperature.
OPERATION
Notes:
•
The power indicator will always be illuminated unless the heater is unplugged or
has fallen over.
•
On repeated use, ensure metal does not become attached onto any part of the
power cord before plugging it into the power socket.
Note:
It is suggested to set the thermostat to MAX first before turning towards the MIN
marker as required.
Summary of Contents for KAOILHTB24A
