background image

Maintenance and disposal must be carried out by qualified personnel only 
(R134a, GWP=1300).

The materials used for packaging can be recycled.

Do not use appliance outdoors.

Do not obstruct the air intake or outlet.

Do not use the appliance in laundry rooms or bathrooms.

Instructions

Read these instructions carefully before installing and/or using the appliance.

Keep a copy of these instructions. If ownership of the appliance is transferred to 
another owner, they should also be given a copy of these instructions.

Failure to respect these instructions may result in injury or damage to the 
appliance. Kogan.com is not liable for damaged derived from failing to following 
these instructions.

Electrical Connections

After moving the appliance, wait at least an hour before turning it back on again.
Before plugging the appliance in to the mains socket, check that:

The mains power supply corresponds to the working voltage indicated on the 
rating plate.

The power socket and electrical circuit are adequate for the appliance.

The power socket is adequately earthed.

Installation

Position the appliance in the room in the room to be dehumidified. A free space of at 
least 50cm must be left at the front of the dehumidifier, so as to not block the air outlet.
For efficient ventilation, a space of about 5~10cm should be left at the back of the 
appliance. The condensate may then be drained in one of the following ways:

Draining into the tank

The condensate can be drained directly into the tank, which can
then be easily removed (refer to Fig 1).

Continuous external draining

If the appliance is to be operating for long periods but you are unable to empty the 
tank regularly, you are recommended to use the continuous drain facility:

1. Remove the continuous drain cap by turning it anti-clockwise (fig 2).
2. Insert the gasket joint into the drain hose connector, then faster the drain hose 

connector onto the spout by turning it clockwise (fig 3 & fig 4).

3. Fasten the drain hose to the connector (fig 5).

4

Summary of Contents for KADHM16LXXA










Reviews: