Kogan KACCTV4CHA, User Manual

Page: 5 / 29

7 Switch between single screen and multi-screen.
8 FN 1) Press to switch from single split to multi-split view mode, or
reverse in preview and playback mode.
2) Press to enter/exit continuous selection when setting motion
detection area and schedule record.
3) Press to set start time and end time in file search.
9 MENU One key system setup.
10 ESC Return to previous menu.
11 PTZ One key PTZ control.
12 BACKUP Backup Record
13 TV/VGA Switch the operation interface between TV and VGA.
14 CLEAR Alarm Off
15 SEQ Call Sequence
16 1) Play/Pause
2) One key file search
17 Stop
18 Play in slow mode/fast rewind
19 Fast forward
5 Hard Disk Installation
The hard disk is not included in the factory fittings. Users can mount suitable hard disks by calculating its
capacity referring “Appendix 5.2 Methods of Calculating HDD Capacity”.
1) Installation procedure
•
Open the DVR case. Mount the 4 shock absorption washers into the clamping slots (four protruding
steps) in the case.
•
Connect the HDD data cable and HDD power cable to the HDD.
•
Attach the hard disk to the shock absorption washers by aligning the installation holes to the case.
Hold and fix them by 4 x M3*12 head screws plus plain washers.
•
Connect the HDD data cable and HDD power cable to the respond interfaces of the main board.
•
Replace the DVR top cover, then screw it closed.
NOTE: If installing your own HDD, please be sure to purchase a DVR rated HDD instead of a computer rated
HDD. Computer rated HDDs are not designed for continuous DVR use.
NOTE: Please format the HDD for the first use, or the system will return a “Hard Disk Error” notification
accompanied by an audio alarm. Please see 4.9 Maintenance for details.
6 Rear Panel Connection
•
Power Input
Connect the power adapter to the Power Input interface of the DVR. Confirm that the DVR power supply
input switch is positioned correctly for the local voltage before connecting and powering the unit.
Turn on the unit. The power LED will light up if the power cable is connected correctly.
NOTE: Please use the power adapter contained in the package.
•
Video Input
The video input interface is standard BNC socket, 1Vp-p, 75Ω.
NOTE: The video signal cable should be kept away from the interference of strong electromagnetism and the
city electric power grid.
4