Chapter Two: Hardware
This chapter is a general description of the device interfaces and connections. It describes the methods of
hard disk installation, the interface of the front panel and the rear panel for users to connect the cables
correctly.
1 Package Content
After purchasing the DVR product, unpack it and unload it flat onto the floor or a place where it is to be
located, and refer to the “Package Contents” for the correct number of device fittings.
2 Front Panel Operation
Table 1 – Front Panel Description
Type
Name
Description
LED
Power
Red when recording. Green when not recording.
HDD
Hard disk indicator. Green or blinking when reading/writing.
Black when idle.
3 Rear Panel of Operation
Table 2 – Rear Panel Description
NO.
Interface
Description
1
Video In
4/8 channel video input: BNC (1Vp_p, 75Ω)
2
TV Out
1 channel TV output, BNC (1Vp-p, 75Ω
)
3
Audio Out
1 channel audio output, BNC (2Vp-p, 600Ω)
4
Audio In
4 channels audio input: RCA (2Vp-p, 600Ω)
5
VGA Output
1: DIN-15
6
Network Interface 1: RJ45 10/100M self-adaptive
USB Interface
2: USB 2.0
7
RS485
1: Half Duplex ( + - )
8
Power
DC 12V
4 Remote Controller
Table 3 – Remote Controller Description
NO.
Name
Description
1
REC
Record
2
Power ON/OFF
Turn the device off or on.
3
Numbers
Input numbers or select to switch among relevant channels.
4
Function Buttons
DEL: Delete
5
Arrow Buttons
When in menu mode, press [
◄
], [► ] to move to selection boxes.
Press [▲ ], [▼ ] to select sub-menu parameters.
6
1) Press to confirm operations in menu mode.
2) Press to select record type in setting schedule.
3) Press to change status of the current motion detection block.
3
Summary of Contents for KACCTV4CHA
Page 1: ......
