Kogan EziNAV G3 User Manual Download

Page: 38 / 107

Icon

Information

Details

Action

route to be navigated, the
traffic restriction of the
upcoming intersection is
shown here if there is any.

Second route
event
(manoeuvre
after the next
manoeuvre)

When GPS position and an
active route

are both

available, this field shows the
route event that follows the
next route event shown in
the above described area.

Tap this area to open the
Itinerary screen with the
turn by turn guidance
instructions.

Approaching a
Road Safety
Camera

This icon appears when you
are approaching a Road
Safety Camera, and the
warning for cameras is
enabled in Settings.

Tap this area to suppress
the audible camera warning.

Stops the
running
simulation

This icon appears during
Route Fly Over, Route
Simulation, and Track Log
playback.

Tap this area to stop the
simulation.

Route
recalculation
progress

During route recalculation,
this field shows the
recalculation progress
between 0% and 100%.

Nothing happens if you tap
this area of the screen.

Indicator strip

- sounds muted/enabled

- Track Log recording

- TMC status

- Bluetooth status

Nothing happens if you tap
this area of the screen.

The following symbols appear in the Indicator strip:

Icon

Description

The sound output of Nav N Go iGO 8 is muted.

The sound output of Nav N Go iGO 8 is enabled.

Nav N Go iGO 8 records a Track log when GPS position is available.

Track log recording is disabled.

No TMC receiver is connected or TMC is turned off.

TMC receiver is connected and a radio station with TMC broadcast is received.

There are new, unread TMC events.

Summary of Contents for EziNAV G3












































































































Search results

Summary of Contents for EziNAV G3

Reviews:

Related manuals for EziNAV G3

Brands by name

Popular brands

Kogan EziNAV G3, User Manual

Search results

Summary of Contents for EziNAV G3

Reviews:

Related manuals for EziNAV G3

Brands by name

Popular brands