Koenic KST 240, User Manual

Page: 19 / 85

17
English
1 2
3 4
5 6
7 8
Caution
Never directly point the steam boost into the
direction of people or animals!
Automatic switch-off
Press the timer button to set the automatic
switch off time between 8 or 60 minutes.
Dry ironing
The tank can be empty for dry ironing.
After use
1. Put the iron back on the steam station.
2. Turn the control dial to MIN setting.
3. Press the ON/OFF/STANDBY button to
switch off the steam station.
4. Unplug the power plug from the power
outlet and let the product cool down
completely after at least 3 hours.
Note
To avoid the building up of scale, it is
essential that you rinse out the boiler after
certain times of use as shown in step 5 to 8.
5. Remove the boiler cap by unscrewing it
anti-clockwise.
6. Fill approx. 1/4 liter of clean water into the
boiler by using a jug.
7. Shake the base unit for a few moments and
then empty it completely.
8. Replace and tighten up the boiler cap.
Note
In order to obtain the best result, we
recommend that this operation should be
done twice.
KST240_A5_130524.indb 17 24/5/13 3:56 PM