Koenic KST 240, User Manual

Page: 18 / 85

16
English
1
1
2
2
3 4
5 6
7 8
9 10
Caution
Always iron on a heat-resistant surface only.
Steam ironing
1. Unplug the power plug from the power
outlet.
2. Remove the water tank and open the cover
cap. Fill the water tank with with water.
Caution!
Do not fill the water tank above
the
MAX
mark.
3. Close the cover cap and put the water tank
back to the steam station and place the
steam station on a stable surface.
Caution! Please tighten the boiler cap
before plug in.
4. Put the hose holder on the steam station
and insert the hose through the hose holder.
5. Pull out the power cord of the storage space.
6. Connect the power plug to a suitable
power outlet. will be displayed on the
screen.
7. Press the ON/OFF/STANDBY button to
switch on the steam station.
8. Set the desired temperature on the tem-
perature control dial by turning it to the
ironing setting. The operation control LED
turns on.
9. You can set the desired steam amount with
the steam button or you can switch off
the steam entirely for dry ironing.
Low steam High steam
Medium
steam
Max steam
10. Press the steam release button for steam
ironing.
Note
If the tap water in your area is very hard,
using equal parts of tap water and distilled
water is recommended; but do not use
distilled water only.
Caution
Do not put any fragrances, vinegar, laundry
starches, decalcifying agents, ironing aids or
other chemicals in the water tank.
KST240_A5_130524.indb 16 24/5/13 3:56 PM