17
English
Fig.
13
Insert the adapter ring into the meat
mincer attachment on the auger, so
that the nose on the meat grinder
attachment is located in the groove
on the adapter ring and so that the
rounded side faces the union nut.
Now insert the disc of the biscuit
attachment without the pattern plate
into the union nut and screw the union
nut onto the meat grinder attachment.
Now insert the pattern plate back in
the disc and set the desired biscuit
shape.
Fig.
14
Connect the power plug to the mains.
Switch on the device with the
ON/
OFF
switch. Put the biscuit dough into
the filling opening and bowl. Use the
pusher to slowly and steadily push
down the dough and make your biscuits
as desired. When you have finished
your work, switch off the appliance by
pressing the
ON/OFF
switch again
and unplug the appliance. Clean the
device immediately as given in chapter
Cleaning and care
.
Cleaning and care
Warning
• Before cleaning, always switch off the
product and disconnect the plug from the
power supply.
• Make sure that no moisture is entering
the product during cleaning.
• Never immerse the motor enclosure in
water or other liquids.
Fig.
15
Disconnect the power plug.
Fig.
16
Remove the bowl and the union nut.
Remove all special attachments and
inserts as well as the conveyor screw.
Fig.
17
Press and hold the grinder attachment
release button, turn the grinder
attachment to the right until it releases
and remove it.
• Clean all removable parts and the
mincer attachment in warm, soapy
water. Rinse the parts with clean
water and let them dry completely.
• Clean the motor housing with a
slightly damp cloth.
• Never use corrosive detergents, wire
brushes, abrasive scourers, metal
or sharp implements to clean your
product.
• Dry the product thoroughly after
cleaning.
• Store the product in a cool, dry
location, away from children and
pets.
• Store the corresponding parts in
the correct order and position in the
pusher. Store two of the grinding
discs in the grinding disc magazine
and the biscuit attachment
separately. Install the remaining
parts, conveyor screw, blade, one
grinding disc and the union nut back
to the mincer attachment. Store the
assembled meat grinder attachment
installed to the device or separately.
Observe the chapter
Assembling
and use
for assembling.
Attention
The components P, Q and D may not be
cleaned in a dishwaser. Only clean them by
hand, as they will tarnish when cleaned in a
dishwasher.
KMG4151B-Meat Grinder_190809_V06_HR.indb 17
12/8/2019 10:09
Summary of Contents for KMG 4151 B
Page 35: ...35 KMG4151B Meat Grinder_190809_V06_HR indb 35 12 8 2019 10 09...
Page 36: ...36 Size A5 10 30 KMG4151B Meat Grinder_190809_V06_HR indb 36 12 8 2019 10 09...
Page 41: ...41 12 13 14 ON OFF ON OFF 15 16 17 KMG4151B Meat Grinder_190809_V06_HR indb 41 12 8 2019 10 09...
Page 43: ...43 30 KMG4151B Meat Grinder_190809_V06_HR indb 43 12 8 2019 10 09...
