25
English
Error codes
Code Meaning
Possible causes
E1
Longer inlet time
Flow meter, drain valve or pump failure, it should
be repaired by a qualified worker
E3
Not reaching required temperature
Heating tube or thermistor anomaly, it should be
repaired by a qualified worker
E4
Overflow
Some component of the dishwasher leaks
E9
Touch button adhesion
Water or other material in the key area causes
E9. It should be repaired by a qualified worker if
after removing water/material, the problem (E9)
still exist.
Ed
Communication anomaly
It should be repaired by a qualified worker
EF
Water tank float anomaly
It should be repaired by a qualified worker
EA
Steam generator anomaly
It should be repaired by a qualified worker
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under
Solution
, please contact your manufacturer.
Problem
Possible causes
Solution
Product does not work
• Interrupted power supply
• Check the power supply
• Water pressure is too low
• Check whether water supply
is connected properly and
water is turned on
• Dishwasher door is not
properly closed
• Ensure door is closed
properly
Water is not pumped out of
the dishwasher
• Kink in drain hose
• Check the drain hose
• Filter is clogged
• Check and clean the coarse
filter
• Kitchen sink is clogged
• Check whether the kitchen
sink is draining well or call a
service agent for help
Rust stains on cutlery
• Cutlery are not corrosion
resistant
• Do not wash these items in
dishwasher
• A programme was not run
after refilling salt
• Always run a quick
programme after adding salt
• Softener lid is loose
• Check and tighten it
Knocking noise in the cabinet • Spray arm is knocking
against an item in the basket
• Interrupt the program and
re-arrange the items
Rattling noise
• Items of crockery are loose in
the cabinet
IM_KDW1112_180620_V05_HR.indb 25
20/6/18 2:05 pm
