K441XX Automatic Non-Woods Metal Noack Evaporative Apparatus
Operation and Instruction Manual
K441XX-Manual
- 4 -
1.3 Instrument
Specifications
Model:
K44100
K44190
Electrical
Requirements:
115V ±15%, 60Hz
220V ±15%, 50/60Hz
Test Temperature
Range:
225°C to 275°C
Measurable
Temperature Range:
0°C to 320°C
Temperature
Resolution:
0.01°C
Temperature
Accuracy:
± 0.2°C
Maximum Ambient
Temperature:
35°C
Relative Humidity:
80%
Heating Power:
420W
Repeatability /
Reproducibility:
According to ASTM
D5800 or better
Dimensions:
(L x W x H, in.(cm))
15.75 x 17.72 x 17.72
(40 x 45 x 45)
Net Weight:
48.5 lbs (22kg)
2 Safety Information and Warnings
Safety Considerations.
The use of this
equipment may involve
hazardous
materials and
operations. This manual does not purport to address
all of the safety problems associated with the use of
this equipment. It is the responsibility of any user of
this equipment to investigate, research, and
establish appropriate safety and health practices and
determine the applicability of regulatory limitations
prior to use.
DO NOT
allow unauthorized persons to access
the analyzer.
STAY ALERT!
Do not operate this unit while
under the influence of medication, alcohol, or
drugs.
Equipment Modifications and Replacement
Parts:
Any modification or alteration of this
equipment from that of factory specifications is not
recommended and voids the manufacturer warranty,
product safety, performance specifications, and/or
certifications whether specified or implied, and may
result in personal injury and/or property loss.
Replacement parts must be O.E.M. exact
replacement equipment.
Chemical Reagents Information:
Chemicals and
reagents used in performing the test may exhibit
potential hazards. Any user must be familiarized
with the possible dangers before use. We also
recommend consulting the Material Data and
Safety Sheet (MSDS) on each chemical reagent
for additional information. MSDS information can
be easily located on the internet at
http://siri.uvm.edu or http://www.sigma-
aldrich.com.
Disposal of the Instrument
Please note the crossed out symbol of a trash can
on the instrument (please see symbol below). This
indicates that the product must be disposed of
separate from waste at the end of its operational
life. The user that intends to dispose of this
equipment must contact the manufacturer to
ensure proper disposal.