Koehler K41100, Operation And Instruction Manual

Page: 21 / 33

K41100

To reinitialize the program, press and hold the key for 2 seconds
(the RUN LED goes out). The regulator is then ready to restart a test.
4.3 - Interruption of a test

To stop a test in progress, press and hold down the
key for 2 seconds (the RUN LED goes out).

To put the program on hold, press the key (the RUN LED goes out
and the HOLD LED lights up).
‘
HOLD
’ is indicated on the lower display.
The temperature regulator will remain in this status until it is restarted or
stopped.

To restart, press the key (the RUN LED will light up and the HOLD
LED will go out). ‘
RUN
’ is indicated on the lower display.

To stop the test, press the key in for two seconds (the HOLD LED
will go out).
18/30