Koehler ADA5000 Operation And Instruction Manual Download Page 4

ADA5000 Automatic Distillation Analyzer 

Operation and Instruction Manual 

ADA5000-Manual 

1 -

 

1 Introduction 

 

The Koehler Automatic Distillation Analyzer is 

designed to perform optimal distillation analysis 
of gasolines, fuels, oils, solvents, aromatics, 
napthas, kerosenes, hydrocarbons, and other 
volatile products to ensure conformity to rigid 
quality control standards. The analyzer 
automatically performs tests, process results, 
and produce standard reports according to 
ASTM, ISO, and related specifications. 

 

This manual provides important information 

regarding safety, technical reference, installation 
requirements, operating condition specifications, 
user facility resource requirements, and 
operating instructions for the Automatic 
Distillation Analyzer. This manual should also be 
used in conjunction with applicable published 
laboratory procedures. Information on these 
procedures is given in section 1.2. 
 

1.1 

Koehler’s Commitment to Our 
Customers 

 

Providing quality testing instrumentation and 

technical support services for research and 
testing laboratories has been our specialty for 
more than 50 years. At Koehler, the primary 
focus of our business is providing you with the 
full support of your laboratory testing needs. Our 
products are backed by our staff of technically 
knowledgeable, trained specialists who are 
experienced in both petroleum products testing 
and instrument service to better understand your 
requirements and provide you with the best 
solutions. You can depend on Koehler for a full 
range of accurate and reliable instrumentation 
as well as support for your laboratory testing 
programs. Please do not hesitate to contact us 
at any time with your inquiries about equipment, 
tests, or technical support. 

 

Toll Free: 1-800-878-9070 (US only) 
Tel: +1 631 589 3800 
Fax: +1 631 589 3815 
 
Email: [email protected] 

http://www.koehlerinstrument.com

 

 

1.2 

Recommended Resources and 
Publications 

 

1.  American Society for Testing and Materials 

(ASTM) 

100 Barr Harbor Drive 
West Conshohocken, Pennsylvania 19428-
2959, USA 
Tel: +1 610 832 9500  
Fax: +1 610 832 9555 

http://www.astm.org

 

email: [email protected] 

 

ASTM Publication: 

  ASTM D86:  

 ASTM D285: 

 ASTM D850: 

 ASTM D1078: 

 ASTM D4737: 

  ASTM D189 Section 10:  

 
2. 

International Organization for 
Standardization (ISO) 
1, rue de Varembé 
Case postale 56 
CH-1211 Geneva 20, Switzerland 
Tel: 41 22 749 01 11  
Fax: 41 22 733 34 30 
http://www.iso.org 

 

ISO Publication: 

 ISO 3405: 

 

3.  Energy Institute (IP) 

61 New Cavendish Street 
London, WIM 8AR, United Kingdom 
Tel: 44 (0)20 7467 7100  
Fax: 44 (0)20 7255 1472 
http://www.energyinstpubs.org.uk/ 

 

IP Publication: 

 IP 123: 

 

4.  Deutsche International Norm (DIN) 

http://www.din.de 

 

DIN Publication: 

 DIN 51751: 

 

5. Association Française de Normalisation 

(AFNOR) 
http://www.afnor.fr 

 
AFNOR Publication:

 

  NF M 07-002 

 

6.  Japanese Industrial Standards(JIS) 

http://www.jisc.go.jp

 

 

JIS Publication: 

 JIS J2254I 

Summary of Contents for ADA5000
























Reviews: