Kodicom KSR816, User Manual

Page: 58 / 65

97
2. KSR816 DVR Installation
6. Adding HDD
Ad
di
ng
H
D
D
96
2. KSR816 DVR Installation
Ad
ding
H
D
D
6. Adding HDD
6.1 Installing new HDD
[Figure 6-1. HDD Format]
[Figure 6-2. HDD Format progress]
� Turn the system off and install the new HDD
into the system.
�
Turn the system back on and wait for the
HDD format message.
� The message will ask you to confirm HDD
format. HDD format is a necessary
procedure before using the newly installed
HDD.
� Press [Yes] button to being formatting the
new HDD. Pressing [No] button will cancel
HDD format and shutdown the system.
� Once the system begins formatting the HDD,
you can view the progress through the
progress bar.
� Once HDD is complete, the system will
restart.
� If the newly installed HDD database does not
correspond with the original HDD, the system
will display the HDD table.
�
If the database of the HDDs do not correspond,
you must format either the system
’ s original
HDD or the newly installed HDD.
� From the table, you can select the HDD you wish
to format, then select [OK] button. The system will
display a confirmation message shown in Figure
6-4.
� Select [Cancel] button to exit HDD table screen.
[All Format]
� Press [All Format] button to format all existing
HDDs.
� The system will display a warning message. To
confirm and proceed with formatting the selected
HDD, press [OK] button. To cancel format and
return to HDD table, select [Cancel] button.
� You can view the HDD format progress through
the progress bar.
� The system will restart once the format is
complete.
[Caution]
� You are recommended to check both the original HDD and the new Hdd Interface jumper and
set the MASTER and SLAVE.
�
Any newly installed HDD must be formatted
�
Remember that formatting will erase any data stored on the new HDD. Please make sure you
have saved any important data before proceeding with HDD format.
[Figure 6-3. HDD Table ]
[Figure 6-4. HDD confirm message]
[Figure 6-5. HDD Format progress]
6.2 Checking HDD Database
[Caution]
�
Any newly installed HDD must be formatted
� Remember that formatting will erase all data
stored on the selected HDD. Please make sure
you have saved all important data before
proceeding with HDD format (see page 22 for
details on saving backup).
6. Adding HDD