73
1. KSR816 Guide
7. System Setup
S
yst
em
S
e
tup
72
1. KSR816 Guide
7. System Setup
S
yst
em
S
e
tup
[Figure 7-70. Center IP/Tel Setup]
[Center IP/Tel Input Screen]
� Input the IP address or telephone number of the center
using the mouse or directional keys and press the Enter
button on the front panel of the system.
�비상시 메일 주소로 긴급 통보하기 위해 SMTP 주소, 송신자 및 수신자 메일 주소, 전송시간, 연동 이벤트
를 설정해야 합니다.
[Select/Unselect Sensor]
�You can select/unselect the sensor to be used as an
emergency sensor.
�In case a signal is generated in the emergency sensor,
the images of the camera connected to it are transmitted
to a remote location.
�You can easily select/unselect all sensors using the
[Select All] and [Unselect All] buttons.
[Center] Tab
�To set the center connection environment, click the
[Center] tab.
[E-mail] Tab
�To set the e-mail environment, click the [E-mail] tab.
[Sender]
�To input the mail sender’
s account, click the
[Input] button.
[Recipient]
�To input the recipient’
s mail address in case of
an emergency, click the [Input] button.
[Image Count]
�Set the number of images that can be
transmitted to a mail address.
�In case the image count is set to “None,”only
messages without images are transmitted.
[Interworking Event]
�To enable the Emergency Warning feature by
sensor event, select the [Sensor Event] field.
�To enable the Emergency Warning feature using
the [Emergency] button on the front panel of the
system, select the [Emergency Button Event] field.
[SMTP Mail Server]
�Input the address of the mail-sending server.
�To set the SMTP mail server, click the [Input]
button.
[Figure 7-71. E-mail Setup]
