71
1. KSR816 Guide
7. System Setup
S
yst
em
S
e
tup
70
1. KSR816 Guide
7. System Setup
S
yst
em
S
e
tup
[Figure 7-67. ID/Password setup]
[Figure 7-68. IP Address setup]
[ID/Password setup]
�
When using ADSL or VDSL network, you
must enter the ID and password of remote
back up server.
�
Use the mouse or the directional keys and
Enter
key to enter the ID and password.
[IP address setup]
� Screen for inputting [Site IP], [Subnet Mask], and
[Gateway]
�
Use the mouse or the directional keys and
Enter
key to enter the IP address.
�When sensor signals are generated during an emergency, corresponding images are sent to the remote location
where the center program is installed using the Emergency Warning feature.
To use the Emergency Warning function, set the network address of the center, transmission time, and interworking
event.
[Select/Unselect Sensor]
�You can select/unselect the sensor to be used as an
emergency sensor.
�In case a signal is generated in the emergency sensor,
the images of the camera connected to it are
transmitted to a remote location.
�You can easily select/unselect all sensors using the
[Select All] and [Unselect All] buttons.
[Center] Tab
�To set the center connection environment, click the
[Center] tab.
[E-mail] Tab
�To set the e-mail environment, click the [E-mail] tab.
[Center IP/Tel]
�To input the network IP address where the center
program is installed, click the [Input] button.
�To connect to a remote location by modem, input the
telephone number of the remote location.
[Transmission Time]
�Set the time for transmitting images to a remote
location.
�You can change the transmission time using the
mouse scroll wheel or jog/shuttle.
[nterworking Event]
�To enable the Emergency Warning feature by sensor
event, select the [Sensor Event] field.
�To enable the Emergency Warning feature using the
[Emergency] button on the front panel of the system,
select the [Emergency Button Event] field.
[Figure 7-69. Center Setup]
