MDC-2900 Series
Chapter 2 Method of installation
0092629012-07
2-9
2.3.2 Installation of MRM-105
The Processor unit MRM-105 can be mounted on a table or a panel. The procedure is as follows.
(1) Drill four nut-holes with the size shown in Figure 2.10.
(2) Fit the Processor unit.
4mm screw for 4holes
308 mm
12 1/8 inch
308 mm
12 1/8 inch
308 mm
12 1/8 inch
308 mm
12 1/8 inch
Figure 2.10 Holes for mounting a Processor unit
Unit: mm (inch)
