MDC-2900 Series
Chapter 3 Setup after installation
0092629012-07
3-5
3.2 Setup Interface
For display mode, TT(ARPA), true ship’s trail and own ship’s trail, it is necessary to input ship’s
bearing data and ship’s speed data from other devices. In addition, for AIS, mapping function,
display of own ship’s information and display of latitude and longitude, it is necessary to input
latitude and longitude data of own ship’s data. In order to use these datum, set the following menu
items after connection in accordance with 2.4 “Cable connection to a Display unit”.
Example Display : [MENU] => [MAINTENANCE] => [I/O]
MENU
>
MAINTENANCE
>
I/O
HDG AUTO
GPS 44.7°
OFFSET
0.0°
STW VBW
XXX.Xkn
COG/SOG AUTO
GPS 44.7°
GPS 13.3kn
POSITION AUTO
GPS 35°27.511N
139°50.065E
OFFSET
DTM
0.000N
0.000E
DATUM
REF
W84
LOCAL
W84
SET/DRIFT VDR
0.0°
0.0°
TIME ZDA
GPS 08/07/17
02:10
TIME ZONE
09:00
CLOCK SET
>
DETAIL
>
SET UP Item
Those show the
values of
sentences set in
the set items.
Refer to 3.2.3
When the sentence
set in the set items
is not input, the
name of device is
not displayed and
XXX is displayed.
Figure3.3 I/O menu
Refer to 3.2.3
Refer to 3.2.4
Refer to 3.2.5
Refer to 3.2.7
Refer to 3.2.4
Refer to 3.2.6
Refer to 3.2.1
Refer to 3.2.1
Refer to 3.2.8
～
3.2.12
