Koden KAT-330, Operation Manual

Page: 58 / 110

Operation
Page 56
SOG vectors can also be displayed on the screen if this item is selected from
the
‘Options’ menu.
Some of the layers displayed on the chart can be removed to provide more
clarity on the display. The ‘
Chart Settings’ screen provides a way of modifying
these.
It is possible to record and display your own vessel track on the Chart feature,
showing up to 30 days of voyage history. It can also be downloaded to an SD
card from the Logging menu.
The chart feature is an aid for the display of information only and should not
be used for vessel navigation.
4.6.12 Help and support screen
This screen is available from the ‘Home’ > ‘System Settings’ menu and
provides contact information for the product manufacturer.
It also provides relevant information from the User Manual.
4.6.13 User settings screen
From this screen, it is possible to set the display brightness, set the display to
a day or night colour scheme, set the operating units to metric or nautical, and
configure the sounds emitted by the device. It is also possible from this screen
to set the UTC time offset, change the password, change the filter settings and
display the menus in a number of non-English languages.
4.7 Configuring vessel information
4.7.1 Pre-configuration checks
To proceed with configuration the steps in Section 3. should already have
been completed.
4.7.2 Configuring vessel identification information
The AIS transceiver must be configured with information about the vessel on
which it is installed prior to operation. The following information is required to
be entered in the
‘Home’ > ‘system settings’ > ‘Vessel data settings’ menu: