Koden ESR-140Mk II, Operation Manual

Page: 71 / 78

５－３
OPTION
REMOTE CONTROLLER SETTING
1. Press MENU KEY. “MENU” appears on the screen.
2. Use the cursor shift key 「↑」 or 「↓」 to highlight “REMOTE CONTROLLER SET” and by
pressing the cursor shift key 「←」 or 「→」 the following appears on the screen.
z
The above box shows the initial settings of the remote control keys.
z
Highlighting the item to be changed and pressing the cursor shift key 「←」 or 「→」 the
keyoperation will change as follows.
RENGE SHALLOW → RANGE DEEP → SECTOR WIDE → SECTOR NARROW →
DISPLAY MODE* → OPERATION MODE 1 → OPERATION MODE 2 → TARGET →
THRESHOLD → CURSOR SELECTION → CURSOR SHIFT UP → CURSOR SHIFT
DOWN → CURSOR SHIFT RIGHT → CURSOR SHIFT LEFT → NONE → HOIST
UPLOAD → HOIST DOWNLOAD → TILT UP → TILT DOWN → BEARING RIGHT
→ BEARING LEFT
z
DISPLAY MODE* means that each press of the key changes the mode as follows.
SONAR MODE → OFF CENTER MODE → BOTTOM SCAN MODE → ECHO
SOUNDER MODE → SONAR MODE
z
Press ENTER KEY to finish the setting.
Press MENU KEY to escape the setting.
z
Use the cursor shift key
「↑」
or
「↓」 to select the desired item.
Remote controller keys