３－16
FUNCTION SETTINGS
6. HOIST AUTO UP
The Soundome can be retracted automatically when the ship speed is over a specified
speed by connecting to an external equipment.
z
Each press of [
←
] or [
→
] key changes the setting, “OFF, 10kt (18km/h).”
z
Select the desired value, and then press the Enter key.
z
Use the Tilt Key [
↑
] or [
↓
] to change the speed after selecting the initial value 10 kt (18
km/h). Selectable values : "1 kt ~15 kt" or "1 km/h ~ 27 km/h”
Tilt key [
↑
] : increases the value Tilt key [
↓
] : decreases the value
z
Soundome position mark shows the down direction
[downward arrow] on the left bottom of the screen while
the Soundome is lowering. When the Hoist Auto Up
function is activated, the mark changes into [upward
arrow]. The Sensor Lamp goes off when the Soundome
is retracted automatically.
We recommend the ship speed below 15kt (27km/h) while retracting.
7. TRAIN CORRECT
To adjust the deviation of the bow direction (0°), the following procedure is required.
z
In the Sonar mode, use [
←
] or [
→
] key to set the Bearing toward Bow direction.
z
Press the Menu key, and select OTHERS.
z
Highlight “TRAIN CORRECT.”
z
Press [
←
] or [
→
] key to display the degree that you have set in the Sonar mode.
z
Press the Enter key.
BOW DIRECTION (0°)
[EXAMPLE]
Set the bearing at 90°, the display
turned 90° counterclockwise.
z
Releasing this function, set the current bearing at 0° and follow the above procedure.
Shows the Soundome
position, lowering or
raising.
