Koden CVS-702D, Basic Operation Manual

Page: 124 / 144

Chapter 3 To make the best of [CM] keys CVS-702D
3-10 0093107022-02
3.1.3 Use [CM] keys as screen mode switching and one touch switch of setting:
This is to use [CM] key as screen mode switching normally, and to change to one touch switch
of setting when fishing method changes.
Per each [CM] key for one touch switch of setting, 6 types (CM1 to CM6) of screen mode can
be set up.
Therefore, total 36 types of screen modes, 6 types per CM1 to CM6, can be stored.
To store settings per fishing method in [CM] keys:
1. Change [CM] keys to [One touch switch of setting]. Refer to “To set [CM] key to [One touch
switch of setting]”, p 3-7 for details.
Change [CM Key Usage] to [CM].
The [CM] key with the same CM number as in the header display lights red.
2. Settings are stored in [CM] keys. Refer to “To store in [CM] keys”, “To store in a new [CM]
key” and “To store a new setting in another [CM] key based on a particular setting in a [CM]
key”, p 3-8 for details.
To store screen mode in the setting of [CM] key per fishing method:
1. Press the [CM] key in which screen mode to store. To store in CM1, press [CM1] key .
The header display turns to CM1.
2. Change [CM] key to [Screen mode switching]. Refer to “To set [CM] key to [Screen mode
switching], p 3-3, [CM] key is changed to [Screen mode switching].
3. Store the screen mode in [CM1] to [CM6] keys, as described in “To set screen mode per
CM key”, p 3-4, the screen mode is preset to [CM1] to [CM6] key. The CM number in the
header display does not change. The [CM] key pressed lights red.
4. Store the screen mode in each CM key, by repeating procedures 1 and 2 above.