Koden CVR-010, Operation Manual

Page: 66 / 114

CVR–010
Advanced Settings
56
8.10.5. Entering Time Offset for Local Standard Time Readout
8.10.5.1. Introduction
・
The date and time readouts displayed at the screen’s upper left corner are initially UTC
(Universal Time Coordinated)
date and time.
・
To display the information referenced to your local standard time (LST), enter the
appropriate time offset (time difference between LST and UTC) via the procedure
described in the next paragraph.
・
The m ajor time offsets from UTC are listed below.
Table 8-1 Major UTC Offsets
- Bangkok: +7 hours - Honolulu: –10 hours
*
1
- Chittagong: +6 hours - New York: –5 hours
*
1
- Djakarta: +7 hours - Houston: –6 hours
* 1
- Dubai
(Gulf Standard Time)
: +5 hours - San Francisco: –8 hours
*
1
- Ho Chi Minh: +7 hours - Rio de Janeiro: –3 hours
- Hong Kong: +8 hours - Lima: –5 hours
- Kuala Lumpur: +8 hours -
- Mumbai
(Bombay)
: +5.5 hours - Barcelona: +1 hour
*
1
- Perth: +8 hours
* 1
- Izmir: +2 hours
* 1
- Seoul: +9 hours - Piraeus: +2 hours
*
1
- Singapore: +8 hours - Gdansk: +1 hour
* 1
- Sydney: +10 hours
*
1
- Hamburg: +1 hour
*
1
- Taipei: +8 hours - Marseilles: +1 hour
* 1
- Tokyo: +9 hours - Oslo: +1 hour
*
1
- Vladivostok: +10 hours - St. Petersburg
(Russia)
: +3 hours
* 1
- Wellington: +12 hours - Reykjavik 0 hour
* 1
:
Add 1 hour for Daylight Saving Time (DST) or Central European Summer Time (CEST)
.
8.10.5.2. Time Offset Entry Procedure
Figure 8-25 Entering Time Offset
(1) Select option “
4:UTC / LST (o f fset )
” by
pressing numeric key

, opening the
associated UTC / LST (offset ) submenu,
ready for entering a time offset.
- Initially an offset of +00 hours 00 minutes
(+00:00) is entered as shown at right to
display the UTC time.
- The + sign should be initially highlighted and
blinking.
- The character highlight can be edited by
pressing

/

, and can be shifted to the
right / left by pressing

/

.
(2) Enter the desired time offset. The
+ /–
sign is switched by pressing

/

.
(3) Press

to complete the entry.
(4) Press

to exit the menu mode.
- To return to the UTC readout, enter 00:00 at step (2).
NOTE: Memory storage of data is done in UTC date/time regardless of on–screen LST readout. See
paragraph 10.1 for greater details.
MAIN MENU
9:INSTALLATION SETTINGS
1:ECHO COLORS
2:DEPTH UNIT
3:DYNAMIC RANGE
4:UTC/LST(offset)
5:CLOCK PRESET
6:TRANSDUCER LOCATION
7:DATA OUTPUT PORT
8:BOTTOM MISSING ALM
9:DEPTH READOUT RESPONSE
0:KEY BEEP SETTING
4:UTC / LST (offset)
+ 0 0 :0 0
Character highlight