16
A-61734 March 2012
Blank Image Detection
tab
Blank Image Detection provides the following options.
Blank Image Detection
— allows you to configure the scanner to not
give blank images to the scanning application.
•
Off:
all images are given to the scanning application.
•
Size
: images will be considered blank based on the size of the image
that would be given to the scanning application (i.e., after all other
settings have been applied). Select the image size (KB), below which
an image is determined to be blank. Images with sizes less than the
number you select will not be created. If you use this option, you
must specify a blank image size for each image type (
Black and
White,
Grayscale
and
Color)
you want to delete. If you do not make
an entry in these fields, all images are kept.
•
Content
: images will be considered blank based on the document
content within the image. Select
Black and White
,
Grayscale
or
Color
to choose the maximum amount of content that the scanner
will consider to be blank. Any image that has more content than this
value will be considered non-blank and will be given to the scanning
application. The values range from
0
to
100
percent.
Learn Content
— allows the scanner to determine the content amount
based on the documents to be scanned. Click
Learn
to
use this
function.
NOTE: Learn mode cannot be applied to both the front and back sides
simultaneously. You must select the side you want to configure.
Summary of Contents for ScanMate i900 Series
Page 1: ......
Page 21: ...20 A 61734 March 2012 About tab Displays information about your scanner and driver...
Page 22: ......
