Troubleshooting
www.kodak.com/go/support
56
Computer/connectivity problems
Picture orientation is
not accurate
Set the Orientation Sensor (
page 27
).
Flash does not fire
Check flash setting, and change as needed (
page 16
).
Battery life is short
Recharge the battery fully or insert a new one (
page 2
).
Camera displays an
error code
■
Press the Shutter button all the way.
■
Battery is exhausted. Recharge the battery fully (
page 3
).
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer (
page 51
), delete
pictures from the camera (
page 34
), switch image storage
locations (
page 25
), or insert a card with available
memory (
page 8
).
■
Contact your local service provider or visit
www.kodak.com/go/support.
If...
Try one or more of the following
The camera does not
communicate with the
computer
■
Make sure the EasyShare software is installed (
page 43
).
■
Turn on the camera.
■
Recharge the battery or insert a new one (
page 2
).
■
Make sure USB cable is securely connected on camera and
computer USB port (
page 51
).
■
Try another USB port on the computer.
■
See the EasyShare software Help.
Slide Show does not
run on an external
video device
■
Adjust the camera Video Out setting (NTSC or PAL,
page 28
).
■
Make sure the external device settings are correct (see the
device’s user’s guide).
If...
Try one or more of the following