SITE SPECIFICATIONS
6
23NOV99 – SS2616-1
Space requirements for a roll-to-roll system
SCSI Connection to Host Computer:
The proper configuration of the SCSI-2 connection will depend on the distance of the host computer from the
PRINTER.
A single-ended connection can be used if the total distance is less than 6 metres (19.7 feet). The customer must supply
a SCSI-2 data CABLE (FAST 20 type) and a SCSI-2 TERMINATOR for single-ended connection. An active FPT
type (forced perfect termination) SCSI-2 TERMINATOR is recommended.
A differential connection must be used if the distance is between 6 and 22.9 metres (19.7 and 75 feet). The customer
must supply a SCSI- 2 data CABLE and a SCSI-2 TERMINATOR for differential connection. A differential SCSI-
2 TERMINATOR is required.
Switching from a single-ended to a differential SCSI-2 connection requires a reconfiguration of the FEE BOARD.
Refer to the INSTALL INSTRUCTIONS for detailed information on how to do this.
Locate SCSI-2 CABLES away from any source of electrical interference (e.g. transformers, fluorescent light ballast).
2.2 .3 meters (86 in. + 12 in.)
_
_
*
*
SCSI−2 connection from host here
Printer
3.8 meters (149 in.)
2.9 meters
(114 in.)
15A
1.5 meters (60 in.)
.91 meters (36 in.)
minimum
.91 meters (36 in.)
.91 meters (36 in.)
.91 meters (36 in.)
minimum
minimum
minimum
G130_0601DA
External modem connection here
