Taking pictures and videos
20
www.kodak.com/go/support
Using the flip-up flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. You can change the flash setting in most Still modes, except Burst;
the default setting is restored when you exit the mode or turn off the camera.
Turning on the flash
Changing the flash settings
Flash-to-subject distance
Zoom position
Flash distance
Wide angle
2–16.1 ft (0.6–4.9 m) @ ISO 140
Telephoto
6.6–12.1 ft (2.0–3.7 m) @ ISO 140
Flash-icon
behavior
Cause
Action
Blinking
Flash is charging.
Wait. Take picture when the icon stops
blinking.
Flash button is pressed,
flash unit is closed.
Open flash unit or take the picture
without flash.
Slide the open flash switch to raise
the flash and to turn it on.
NOTE: The flash unit must be open
to use the flash and to change the flash
modes. An Open Flash warning appears
on the EVF/LCD screen when the flash unit
needs to be open.
open
switch
Press the flash button repeatedly to scroll
through the flash modes (see Flash modes
table).
NOTE: The active flash icon is displayed in
the EVF/LCD screen status area.
button
