Kodak DCS 330 - FIRMWARE VERSION 3.2 AND LATER User Manual Download

Page: 44 / 46

w F

eat
ures

Serial Out Mode

When the serial port is in Serial Out mode, your camera sends data to a remotely
connected device.

Select Serial Out from the Serial
Port menu (page 38).

The Serial Out Mode menu
appears.

Select your choice (described in
the table below).

The setting is retained until you
change it, or use the Transmit
option (page 42). Modem is
selected automatically with this
option.

Menu Choice

Action

Comments

None

No data transmitted

Image Number

A text string containing the image
number of the just-captured image
is sent to the connected device.

Modem

Reserved for Transmit option
(page 42)

Remote Release

Remote Release is automatically
selected when you select Remote
Release in the Serial In menu.
Contact your service
representative regarding a cable, if
needed.

Sync Pulse

A +3VDC signal with a duration
identical to the exposure duration
is sent to the connected device.

Summary of Contents for DCS 330 - FIRMWARE VERSION 3.2 AND LATER















































Search results

Summary of Contents for DCS 330 - FIRMWARE VERSION 3.2 AND LATER

Reviews:

Related manuals for DCS 330 - FIRMWARE VERSION 3.2 AND LATER

Brands by name

Popular brands

Kodak DCS 330 - FIRMWARE VERSION 3.2 AND LATER, User Manual

Search results

Summary of Contents for DCS 330 - FIRMWARE VERSION 3.2 AND LATER

Reviews:

Related manuals for DCS 330 - FIRMWARE VERSION 3.2 AND LATER

Brands by name

Popular brands