18
Putting Yourself in the Picture
There might be times when you want everyone, including yourself, to be in the
picture. For these occasions, use the Self-Timer feature to create a 10-second
delay between the time you press the SHUTTER button and the time the picture
is taken.
1
Set the Mode dial to Capture.
2
Slide the POWER switch to the right to turn
on the camera.
3
Press the SELF-TIMER button.
The Self-timer icon appears in the
Status Display.
If you want to cancel self-timer before the
picture is taken, press the SELF-TIMER
button again or turn off the camera.
4
Place the camera on a flat, steady surface or
tripod.
5
Frame your subject in the viewfinder and
press the SHUTTER button.
The red Self-Timer light, located on the front
of the camera, turns on and stays lit for 8
seconds, then flashes for 2 additional
seconds just before the picture is taken.
The Self-Timer turns off when the picture is
taken.
Menu
Capture
Setup
Review
