background image

A-61527  May 2006

85

USB connection issues

The USB verification tool will check your operating system and 
hardware capability to determine if you have a functioning USB 2.0 or if 
you need to install a USB card. 

Your operating system is correctly configured to support USB 2.0.

If a functioning USB 2.0 port is present, this dialog box will be 
displayed.

Your operating system supports USB 2.0, however, a USB 1.1 port 
was found

 

• If your PC does not have a USB 2.0 port installed, install a USB 2.0 

Accessory card.

• If a USB 2.0 port or card is installed and the USB test tool does not 

recognize the USB card as 2.0, install or update the drivers for that 
card.

Your operating system only supports USB 1.1

There are some host PC operating systems that do not support USB 
2.0, but support USB 1.1 (e.g., Windows 98SE). The 

Kodak

 i55 and i65 

Scanners are rated and designed to operate with USB 2.0, but will 
function in a USB 1.1 port, however, the scanner will only perform at a 
USB 1.1 speed.

Solutions

• Update your operating system to one that supports USB 2.0, such as, 

Windows 2000 or Windows XP. 

• You may add a USB 2.0 card but will function only as a USB 1.1.

Summary of Contents for 8412447 - I55 - Document Scanner






























































































Reviews: