Setting Up the Printer
April 9, 2007
2-7
6.
Remove the label.
7.
Insert the right side of the take-up spool into the spool holder on the
right.
8.
Insert the left side of the take-up spool in the spool holder on the left.
9.
Adjust the take-up spool until the spool locks into the spool holder.
IMPORTANT:
Slack in the ribbon can cause a paper jam.
10.
Turn the supply spool to remove any slack in the ribbon.
11.
Close the top cover.
Turning On the Printer
1.
Press the power switch to on (
|
).
On the operator panel, the orange Power light illuminates and the
Ready message appears when the printer is initialized.
2.
To turn off the printer, press the power switch to off (
).
Take-up spool
On
Off
