68
Chapter 9
Picture is too light. The flash is not needed. Change to Auto flash
(
page 21
).
The subject is too close
when the flash was used.
Move so there is at least 1.6
ft (0.50 m) between the
camera and the subject.
The light sensor is
covered.
Hold the camera so your
hands or other objects do
not cover the light sensor.
Stored pictures are
damaged.
The Picture Card was
removed when the
viewfinder light was
blinking.
Make sure the Picture Card
access light is not blinking
before removing the card.
Pictures remaining
number does not
decrease after
taking a picture.
Picture does not take up
sufficient space to
decrease the picture
remaining number.
The camera is operating
normally. Continue taking
pictures.
Picture is not clear. The lens is dirty.
Clean the lens (
page 82
).
Subject too close when
taking picture.
Move so there is at least 1.6
ft (0.5 m) between the
camera and the subject.
Subject or the camera
moved while the picture
was taken.
Hold the camera steady
while taking the picture.
The subject is too far
away for the flash to be
effective.
Move so there is no more
than 7.5 ft (2.3 m) between
the camera and the subject.
Camera
Problem
Cause
Solution
