3. If DIP switches are set as in the above example, press
“8102”
to call the house using guardroom master
or
lobby phone.
In addition, house number is displayed as small character
“b102”
in FND of guardroom master or lobby
phone.
4. Precautions for DIP Switch Setting (House No. Setting)
1) After setting DIP switches, device power should be reset.
(In ON state, DIP switches cannot be set.)
2) For setting basement floors, switch No. 11 and 12 should be ON state.
3) For direct dialing type lobby phone, up to 12 houses can be set.
Thus, when DIP switches of house interphone and video phone are set, available houses are also 1 to 12 in
number.
4) If user wants to use interphone or video phone as sub-phone, all DIP switches should be in OFF state.
5) When user sets DIP switches, excessive impact on DIP switches may cause abnormal or erroneous
operation of device.
2. For basement floors, DIP switch No. 11 and 12 are generally set toward ON direction.
In this case, the value of DIP switch setting is 3,000 (1,000 + 2,000). However, program uses
“8”
with
similar shape of
“B”
(Basement) to indicate basement floors. Thus, value is not 3,000 but 8,000.
e.g. 4)
