Using set the product an it's ID No. you want to make a call and press
Communication is made available if a user picks up the handset.
※
LOBBY = Multi-family Lobby Phone
For making a call to all guard, set the number of GUARD as 99
25
Functional Description
Functional Description
Absent Mode
24
14. Setting/Cancelling the Absent Mode
If a user presses button with the handset
eing hung up, Going-out LED is turned on.
(To turn the LED off, press the button once again.)
/
/
1. Security sensor inactive during 60 secs. in absent mode(Time for user to go out of the house)
2. In 60 secs. a user can cancel absent mode
3. Absent mode ON after 60 secs. (security sensor active)
4. When alarming, press button for 2 secs. to cancel the alarm
5. On DEVICE of OSD menu, a user can change absent mode details
6. Alarm call is not made to Private Exchanger
OSD function (LCD CONTROL MENU)
1. CALL (push menu button once)
Call to Multi-family Lobby Phone & Segurity Phone and Private Exchanger
3
CALL
LOBBY1
▷
▷
5
CALL
LOBBY1
2. DEVICE (push menu button twice)
OFF
10MINUTE
NO
2
30SEC
30SEC
DEVICE
SWITCH
ALARM TIME
ALARM CALL
CALL TIMES
CAM1 TIME
CAM2 TIME
1) SWITCH OFF : Devices for each of the connection point are disconnected.
If a user changes it's condition to 'ON', the devices are connected and take action.
※
DOOR OPEN on this means DOOR OPEN is set as CAMERA on Installation Menu and a user cannot
control SWITCH OFF/ON.
2) ALARM TIME 10 MINUTES : Alarming for 10 minutes
ALARM TIME 30 MINUTES : Alarming for 20 minutes
ALARM TIME CONTINUE : Continue alarming until cancellation
( * Alarm cancellation: press for 2 secs.)
3) ALARM CALL NO : Do not make alarm call
ALARM CALL GUARD 1 : Make alarm call to GUARD 1
ALARM CALL GUARD 2 : Make alarm call to GUARD 2
※
CAUTION : Alarm call is not made to Private Exchanger
/
/
/
Please push menu button for this function. Select and change using
Contents can be changed according to product's version.
