① Power switch
: Use by turning AC power ON / OFF.
② Monitor screen (LCD)
: Output of image sent from camera.
③ Speaker
④ Microphone
⑤ Monitor button
: Push this button to check around camera
when inside, and image is shown for 60 seconds. (Voice
intercepted between camera and monitor)
⑥ Motion lamp (red)
: When there is call from camera or monitor
motion it flickers, and switches on when on call.
⑦ Speak button
: Use this button to star / stop speaking.
⑧ Open door button
: Use this button to open front door with
connected door switch.
⑨ Power cord
⑩ Brightness adjustment volume
: Adjusting LCD screen
brightness to use.
① White LED diffusion
: Has built-in white LED that works at night
and flickers when it gets dark around camera.
② Camera section
: Converts camera surroundings to visual signal
and deliver to monitor.
③ Speaker
④ Microphone
⑤ Power LED
: Authorize camera power from monitor when visitor pushes
call button on camera to switch on.
⑥ Call button
: Push this button for output of call sound from monitor.
⑦ Monitor terminal
: Terminal that connects monitor with 2 wire (nonpolar).
⑧ DC door opener terminal
: Terminal that connects DC door switch.
⑪ Call volume adjustment switch
: Adjusting call sound in 3 steps
[high, medium, low] to use. (In shipment : [medium])
* Cannot adjust call sound to
“none”
.
⑫ Speaking volume adjustment switch
: Adjust speaking volume
transmitted from camera to monitor in 3 steps [high, medium,
low]to use. (In shipment : [medium])
⑬ AC door switch terminal
: Connects AC door switch.
⑭ Camera terminal
: Connects camera with 2 wire nonpolar.
⑮ Extension monitor terminal
: Connects extension monitor with
2 wire nonpolar.
� Color adjustment volume
: Adjust color on LCD screen. (In shipment,
adjusted to standard color)
� Power input section
: Input AC or DC power and fix power cord.
⑦
⑧
①
②
③
④
⑤
⑥
①
⑩
⑪
⑫
⑬
⑭
⑮
�
⑨
�
Name and functions of Each Part
②
③
④
⑤
⑥
⑦
⑧
■ The Front side
■ CAMER (KC-C62)
■ The Back side
COMPONENTS of PRODUCT
■ Monitor Components
∙Screw for fixing monitor
∙Wall Hanger Fixing Screws
4×25mm
3×8mm
∙Screws for fixing cabinet
body on the wall
∙Screws for fixing camera
to main frame supporter
4×10mm
2.6×6mm
■ Door Camera Components
Door Camera [KC-C62]
Upward adjusting supporter
for lens angle
Camera Main Frame Supporter
A Wall Hanger Frame
∙AC Door Lock Wire
∙DC 12V Adapter (※KCV-D352)
Monitor [KCV-352]
4
Product Functions and Features
Installation location
■ Specifications
■ Max wiring distance
Specifications
Model number
Power
Assurance temperature
Communication system
LCD
Wiring
Mount type
Dimension
KCV-352
SMPS AC100V~AC240V
0℃ ~ 40℃
Handsfree type
3.5”Digital LCD (NTSC / PAL Auto switching)
Camera : 2 wires (Non polarity)
Extension monitor : 2 wires (polarity)
Surface mount
195 (W) × 140 (H) × 34 (D)mm
KCV-D352
DC12V±0.5V / 1.5A
TYPE
Line type
Distance
cross section (㎟ )
Diameter � (㎜ )
monitor ~ camera
monitor ~ extension
monitor
+
0.3
0.6
100
0.5
0.8
120
0.8
1.0
150
CAT5
100
(m)
■ Monitor installation location
∙Standard monitor installation height
is about 1,500mm where screen
center is at eye level.
In this case, wall-hanging metal
center (center of piping) is 1,450mm
above ground level.
∙Standard installation height
■ Caution of Camera installation
∙Avoid installing camera exposed to direct ray of light (and sun).
∙Beware backlight and darkness of visitor’s face, which makes identification difficult.
∙Avoid installing camera in places such as the following picture.
(1) Place illuminating sky as background
(2) Place with white wall reflecting direct ray of light
(3) Place with direct ray of light
■ Camera installation location
∙Camera installation in height Standard
camera installation height is when
lens is about 1,400mm above the floor.
In this case, camera stack center
(piping box) is above 1,390mm above
ground level.
∙Standard installation in height
■ Directly connecting cut-off power cord with power wire
1) Do not do such electric work on your own. Installing product in this way
requires reliance on electric installation man with electric work license.
2) Insulate with insulating tape while cutting off power cord and connecting with power
wire so electric wire metal does not expose. Contact between exposed electric wires
cause fire or electric shock accident.
3) Such electric work requires connection after interception of supplied power.
1) Remove wall-hanger bracket metal behind monitor.
2) Install wall- hanger bracket metal on 1 type box or wall with attached Vis.
3) Connect wiring to monitor back terminal referring to product connection diagram.
4) Hang monitor on wall-hanging metal, and fix monitor on wall- hanger bracket metal
using attached Vis.
5) Plug monitor’
s power plug into consent and check to see if the power switch is [ON]
on the left side of monitor.
※Power consumption : On standby : 0.7W±20%,
In communication : 10.5W±10%
In door opening : 19W±10%
■ Monitor installation
※The above angel of view is based on the KC-C62 camera.
The numbers very according to the type of camera.
5
connection condition railway line type and distance
1. Display product working condition with OSD
: Display call condition, monitor condition, speaking condition, open door condition, Tint,
Bright, error message on OSD
2. When no signal on image, converts to standby condition
3. Very low consumption of electric power in standby
: 0.7W of electric power consumed in standby condition, reducing electric charges.
4. Use of Digital 3.5”
LCD Panel
: Image is very clear and quality excellent due to use of digital LCD Panel.
5. Nonpolar 2 wire method between camera and monitor
: Can be easily installed due to nonpolar 2 wire method between camera and monitor.
6. Extension monitor’
s 2 wire method
: Extension monitor can be easily installed with 2wire polar.
7. Long distance wiring
: Can install up to 150cm between camera and monitor.
8. Can connect door opener to monitor and camera
1) Can connect DC door opener to camera.
2) Can connect AC or DC type door opener to monitor.
※ Beware of simultaneous function of door opener connected to camera and monitor
9. Automatic confirmation tool of connection between camera and monitor
: Connect wiring between camera and monitor, authorize AC power, and when normally wired,
“Tee~dee~tee~dee”sound (2 times)
will be on. If disconnected or camera is malfunctioning,
“Tee~dee~tee~dee”sound (2 times) will be on for 30 seconds,
and screen error (Please check camera or connection) message will be on as LED switches off on monitor, enabling to confirm wiring
condition between camera and monitor.
※ Turn AC power switch OFF, ON before taking measures for above causes.
En
