ZFC
page 24
ZFC K03/0522
8. Installation
8.1 General directions
Mounting, electrical installation, start-up and maintenance of this device
may only be carried out by trained persons authorized by the operator of
the facility. Persons must read and understand this manual before
carrying out its instructions.
This device may only be operated by persons who are authorized and
trained by the operator of the facility. All instructions in this manual are to
be observed.
Make sure, the measuring system is correctly wired up according to the
wiring diagrams. Protection against accidental contact is no longer
assured when the housing cover is removed or the panel cabinet has
been opened (danger from electrical shock). The housing may only be
opened by trained persons authorized by the operator of the facility.
Take careful notice of the "Safety rules, instructions and precautionary
measures" at the front of this manual.
8.2 Installation / Surrounding conditions
Take the relevant IP classification of the
enclosure into account (see identification
plate). Even an enclosure rated for IP67
/ TYPE 4(X) should NEVER be exposed
to strongly varying (weather) conditions.
When panel-mounted, the front
panel of the ZFC is rated for
IP65/TYPE 4(X)!
When used in very cold surroundings or
varying climatic conditions, inside the
instrument case, take the necessary
precautions against moisture.
Mount the ZFC onto a solid structure to
avoid vibrations.
