Kobold Y-DVZ45001/PS25 Operating Instructions Manual Download Page 3

 

 

DVZ 

DVZ B06/1122 

 

page 3 

2.  Note 

Please  read  these  operating  instructions  before  unpacking  and  putting  the  unit 
into operation. Follow the instructions precisely as described herein.  
The instruction manuals on our website www.kobold.com are always for currently 
manufactured version of our products. Due to technical changes, the instruction 
manuals available online may not always correspond to the product version you 
have  purchased.  If  you  need  an  instruction  manual  that  corresponds  to  the 
purchased  product  version,  you  can  request  it  from  us  free  of  charge  by  email 
([email protected]) in PDF format, specifying the relevant invoice number and 
serial number. If you wish, the operating instructions can also be sent to you by 
post in paper form against an applicable postage fee.

 

 
The  devices  are  only  to  be  used,  maintained  and  serviced  by  persons  familiar 
with  these  operating  instructions  and  in  accordance  with  local  regulations 
applying to Health & Safety and prevention of accidents.  
 
When  used  in  machines,  the  measuring  unit  should  be  used  only  when  the 
machines fulfil the EC-machine guidelines. 
 

as per PED 2014/68/EU 

In  acc.  with  Article  4  Paragraph  (3),  "Sound  Engineering  Practice",  of  the 
PED 2014/68/EU no CE mark. 
 
Diagram 8, Pipelines, Group 1, dangerous fluids 
 
 
 

3.  Instrument Inspection 

Instruments are inspected before shipping and sent out in perfect condition.  
Should damage to a device be visible, we recommend a thorough inspection of 
the  delivery  packaging.  In  case  of  damage,  please  inform  your  parcel  service  / 
forwarding  agent  immediately,  since  they  are  responsible  for  damages  during 
transit. 
 

Scope of delivery: 

The standard delivery includes: 

  Compact Vortex Flow Meter 

model: Y-DVZ45001/PS25 

 
 
 
 

Summary of Contents for Y-DVZ45001/PS25





















Reviews: