DVZ
page 14
DVZ B06/1122
8.5.4
Contact type
The function of the transistor switching output is set in menu item "
Con
". The
switching function switches from
no - N/O contact
to
nc - N/C
to
Fr – frequency
(Con and Co1 only and
for sensors with impulse
output)
and back.
N/O contact: contact closes when switching point is exceeded
N/C contact: contact opens when switching point is exceeded
Frequency: frequency output synchronised with the sensor frequency
8.5.5
Current output
The current output is selected in menu items
"
S-C
" Start current indicated value < > 0(4) mA
"
E-C
" End current indicated value < > 20 mA
"
SCS
" Start current selection (0-20 mA or 4-20 mA).
The indicated value at which 0(4) mA flow is entered in menu item Start current.
The indicated value at which 20 mA flow is entered in menu item End current.
8.5.6
Change Code
The change code option "
CCo
" secures the unit against unauthorised tampering.
If the code is different from 000, the user must input the code immediately after
entering the adjustment mode.
If you do not remember your code-number, you have to send the unit back to
Kobold.
