HND-F215
HND-F215 K07/0522
page 9
7.5 Instrument Configuration
Note: Some menu items will be shown depending on the actual
device configuration (e.g. there are some items disabled when the
logger contains data). Please note the hints by the menu items.
For configuration of the device press
-key for 2 seconds; the main menu
of the configuration will be called up. Use key
to select a sub-menu; use
the key to actually go into the sub-menu
selected and to change
parameters.
Use the keys
and
to set the individual value for the parameter.
Press the key
again to memorize the changes made and to
change to the main menu. Use key
to leave the configuration.
Read Logger': Read Out Logger Data
(will be displayed only if data are
memorized in the individual value logger mode)
For more information please refer to the chapter 'data logger - how to display
individual values'.
'Set Configuration': General Device Configurations
Setting general configuration:
Please note: the points marked by *1 will only be displayed if no data is
stored in the logger.
'AVG': Selection of Averaging Proceedings for Flow Measurement *1
(only HND-FF32/33)
Cont:
continuous averaging - the average value calculated from
the measuring conducted during the averaging period will be displayed
Hold:
press key for averaging - flow measurements will be taken during the
averaging period, then the average value will be calculated and
displayed till the next flow measurement is started
.
't.AVG': Setting of Averaging Period *
1
(only with HND-FF32-FF33
)
1 .. 30:
Time for averaging (in seconds) during flow measuring
'Unit': Selection of Temperature Unit °C /°F *
1
°C
: All temperature values in degrees Celsius
°F
: All temperature values in degrees Fahrenheit
'Offset T1': Zero Displacement of Sensor Temperature T1 *
1
(only with HND-FF31)
-10.0 °C...10.0 °C
The zero point of the measurement of channel 1 will be
-18.0 °F...18.0 °F
: displaced by this value.
off
:
Zero point displacement is deactivated (=0.0°)
'Offset T2': Zero Displacement of Temperature T2 *
1
-10.0 °C...10.0 °C
or
The zero point of the measurement of channel 1 will be
displaced
-18.0 °F...18.0 °F
: by this value.
off
:
Zero point displacement is deactivated (=0.0°)
